Brother HL-B2080DW Driver Download

Brother HL-B2080DW Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After installation, print commands can travel through the selected connection setup. The software manages printing only, because the hardware has no scanner, copier, or fax section. Device recognition, command transfer, and printed output stay tied to the active connection.

Brother HL-B2080DW Specifications

Brother HL-B2080DW works as a monochrome laser printer only, with no scanner, copier, ADF, or fax section listed for the chassis. Printing comes from an electrophotographic laser engine for black-and-white output. Standard memory is 64 MB, while the control panel uses a 16-character, single-line LCD. Power input follows the India specification at 220 to 240 V AC, 50/60 Hz.

Print resolution covers 600 × 600 dpi, HQ1200 quality at 2400 × 600 dpi, and 1200 × 1200 dpi. Single-sided speed reaches up to 34 ppm on A4 and 36 ppm on Letter. Automatic duplex printing reaches 16 sides per minute on A4 paper. First print time is less than 8.5 seconds from ready mode through the standard tray at 23 °C and 230 V.

Paper input uses a 250-sheet standard tray for A4, Letter, A5, A5 long-edge, A6, Executive, Legal, Folio, Mexico Legal, and India Legal. The tray accepts plain, thin, recycled, and thick paper from 60 to 163 g/m². A one-sheet manual feed slot takes bond, labels, envelopes, and thicker media from 60 to 230 g/m². Printed output collects as 150 sheets face down, while the face-up path exits one sheet.

Automatic two-sided printing accepts only A4 paper in plain, thin, or recycled weights from 60 to 105 g/m². Connectivity combines Hi-Speed USB 2.0, 10Base-T/100Base-TX Ethernet, wireless LAN using IEEE 802.11b/g/n infrastructure mode, and Wi-Fi Direct through IEEE 802.11g/n. The body measures 356 × 360 × 183 mm and weighs 7.4 kg with supplies. Power draw is about 510 W while printing and about 48 W in ready mode.