Brother HL-5472DW Driver Download

Brother HL-5472DW Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After installation, print commands can travel through USB, a wired network, or a wireless connection. The software manages printing only, because the hardware has no scanner, copier, or fax section. When the connection changes, the driver keeps the printer communication tied to the selected setup.

Brother HL-5472DW Specifications

Brother HL-5472DW is a monochrome laser printer built only for printing. The chassis has no scanner, copier, or fax hardware. Printing comes from an electrophotographic laser engine, and the print-only body uses separate toner and drum supplies. Standard memory is 128 MB. One 144-pin DDR2 SO-DIMM slot can raise memory to 256 MB. A 16-character, single-line LCD shows menu and status feedback.

Print resolution reaches 1200 × 1200 dpi. HQ1200 quality produces 2400 × 600 dpi output, and 600 × 600 dpi remains available for standard jobs. Single-sided printing runs up to 40 ppm on Letter paper and 38 ppm on A4. Automatic duplex printing is built in. Two-sided speed reaches 18 sides per minute on Letter or A4, and first print time is listed at under 8.5 seconds under the stated test conditions.

Paper input starts with a 250-sheet standard tray for common office sizes, including Letter, A4, Legal, Folio, Executive, A6, and several B-size formats. A 50-sheet multipurpose tray takes envelopes, labels, bond paper, and thicker stock. Custom media in that feed path may measure 3 to 8.5 inches wide. Printed pages collect in a 150-sheet face-down output tray. The rear face-up path exits one sheet at a time, and an optional lower tray adds 500 sheets for plain paper.

A nearby computer can connect through Hi-Speed USB 2.0. Network printing can use 10BASE-T/100BASE-TX Ethernet or IEEE 802.11 b/g/n wireless LAN in infrastructure mode. The wireless hardware also supports IEEE 802.11 b ad-hoc mode. With consumables installed, the body measures 14.6 × 15.1 × 10.1 inches and weighs 23.1 lb. Power draw is about 716 W while printing, approximately 1200 W at peak, and 5.0 W in ready mode.