Brother HL-B2100DB Driver Download

Brother HL-B2100DB Driver lets the computer send print jobs correctly to this monochrome laser printer. The machine is built for printing only, so its setup should not involve scanning, copying, or faxing. After the computer recognizes the printer, print commands can move to the device as intended. Driver communication also keeps page output and printer status reporting consistent.

Brother HL-B2100DB Specifications

The Brother HL-B2100DB is a print-only monochrome laser printer with an electrophotographic laser engine. Its controller carries 128 MB of memory. The control panel uses a one-line LCD with 16 characters for local status work. Because the hardware is limited to printing, it has no scanner, copier, fax, or automatic document feeder. Power input is 220 to 240 V AC at 50/60 Hz.

Print quality reaches up to 1200 x 1200 dpi through PCL6 emulation. Single-sided output runs at up to 34 pages per minute on A4 paper and up to 36 pages per minute on Letter. From ready mode and the standard tray, the first page comes out in less than 8.5 seconds at 23 °C, while automatic duplex printing reaches 16 A4 sides per minute.

Paper input comes from a 250-sheet standard tray for 80 g/m² plain paper, while the manual feed slot takes one sheet. The tray accepts plain, thin, recycled, and thick paper. Standard tray weight ranges from 60 to 163 g/m². For envelopes, labels, bond paper, and thicker media, the manual slot handles up to 230 g/m². Printed pages collect in a 150-sheet face-down tray, with one-sheet face-up output at the rear.

Connectivity is limited to Hi-Speed USB 2.0 through a USB Type-B receptacle, and Brother specifies a USB 2.0 cable no longer than two metres. Third-party USB hubs are not supported, while Ethernet and wireless interfaces are not assigned to this model. Physical measurements are 356 x 360 x 183 mm, weight with supplies is 7.5 kg, and sleep mode drops to about 3.8 W.