Brother HL-B2150W Driver Download

Brother HL-B2150W Driver lets the computer send print jobs correctly to this monochrome laser printer. The machine is built for printing only, so its setup should not involve scanning, copying, or faxing. After the computer detects the printer, jobs can move through the available connection method. Proper driver support keeps page output and printer status communication consistent.

Brother HL-B2150W Specifications

The Brother HL-B2150W is a print-only mono laser printer built around an electrophotographic laser engine. Its controller carries 128 MB of memory, while the front panel uses a one-line LCD with 16 characters. Because the listed function is print, the hardware has no scan, copy, fax, or automatic document feeder path. Power input is 220 to 240 V AC at 50/60 Hz, and during printing the engine draws approximately 470 W.

Print resolution reaches up to 1200 x 1200 dpi through PCL6 emulation, while single-sided output runs at up to 34 pages per minute on A4 paper. Letter output reaches up to 36 pages per minute under the same standard. From ready mode with the standard tray, the first page comes out in less than 8.5 seconds at 23 °C, and automatic two-sided printing is not assigned to this model in the specifications.

Paper input comes from a 250-sheet standard tray for 80 g/m² plain paper. The manual feed slot takes one sheet at a time. In the main tray, plain, thin, recycled, and thick paper can range from 60 to 163 g/m². Through the manual slot, envelopes, labels, bond paper, and thicker media are supported up to 230 g/m². Printed sheets collect in a 150-sheet face-down tray, with one-sheet face-up output at the rear.

Connectivity covers Hi-Speed USB 2.0, 10Base-T/100Base-TX Ethernet, Wi-Fi, and Wi-Fi Direct. In Middle Eastern and African countries, Bangladesh, Nepal, and Pakistan, wireless operation uses IEEE 802.11b/g/n infrastructure mode and IEEE 802.11g/n Wi-Fi Direct, while wireless security includes WEP, WPA-PSK, WPA2-PSK, and WPA3-SAE. The unit measures 356 x 360 x 183 mm and weighs 7.3 kg with supplies installed; ready mode uses approximately 43 W, while sleep mode drops to about 3.8 W.