Brother HL-B2000D Driver Download

Brother HL-B2000D Driver lets the computer send print jobs correctly to this monochrome laser printer. The machine is built for printing only, so setup should not involve scanning, copying, or faxing. After the computer recognizes the printer, print commands can pass from the computer to the device. Proper driver communication keeps page output and printer status reporting consistent.

Brother HL-B2000D Specifications

The Brother HL-B2000D is a print-only monochrome laser printer built around an electrophotographic laser engine. Its controller carries 32 MB of memory, while the hardware focuses on single-function document output. Because the machine has no scan, copy, fax, or automatic document feeder function, originals do not enter a capture path. Power input is 220 to 240 V AC at 50/60 Hz, while average printing power is about 510 W at 25 °C.

Print resolution covers 600 x 600 dpi, HQ1200 quality at 2400 x 600 dpi, and 1200 x 1200 dpi. Single-sided speed reaches up to 34 pages per minute on A4 paper and 36 pages per minute on Letter. Automatic two-sided printing works on A4 sheets, while duplex output reaches up to 16 sides per minute. From ready mode, the first print appears in less than 8.5 seconds.

Paper input comes from a 250-sheet standard tray for 80 g/m² plain paper. The manual feed slot takes one sheet at a time. The main tray accepts A4, Letter, A5, A5 long-edge, A6, Executive, Legal, Folio, Mexico Legal, and India Legal. Through the manual slot, envelopes, labels, bond paper, and thicker media can run at weights up to 230 g/m². Printed pages collect in a 150-sheet face-down tray.

Connectivity is limited to Hi-Speed USB 2.0, using a cable no longer than two metres, and no Ethernet or wireless interface is assigned to this model. The brochure lists a 600 MHz processor, TN-B021 toner at about 2,600 pages, and a DR-B021 drum at about 12,000 pages. Physical measurements are 356 x 360 x 183 mm, weight with supplies is 7.4 kg, and sleep mode is about 5.7 W.