Brother HL-B2158W Driver Download

Brother HL-B2158W Driver helps the computer communicate correctly with this monochrome laser printer. The hardware is built for printing only, so setup does not involve scanning, copying, or fax tasks. After the computer recognizes the printer, print jobs can move through its supported connection. Correct driver support keeps page output, command transfer, and device response consistent.

Brother HL-B2158W Specifications

The Brother HL-B2158W is a print-only monochrome laser printer using an electrophotographic laser engine. Its controller carries 128 MB of standard memory, and the local display shows one line with 10 double-byte or 20 single-byte characters. Because the hardware is built only for printing, there is no scanner, copier, fax unit, or automatic document feeder. Power input is specified at 220 to 240 V AC, 50/60 Hz.

Print resolution starts at a physical 600 x 600 dpi, while the best print setting reaches 1200 x 1200 dpi. Single-sided output runs at up to 34 pages per minute on A4 paper and up to 36 pages per minute on Letter. From ready mode and the standard tray, the first page comes out in less than 8.5 seconds at 23 °C, while automatic two-sided printing remains reserved for the HL-B2188DW version.

Paper input comes through a 250-sheet standard tray and a one-sheet manual feed slot. The tray accepts plain, thin, recycled, and thick paper. Standard sizes include A4, Letter, B5, A5, A6, Executive, A4 Short, and 16K. The manual slot takes bond paper, labels, envelopes, and heavier media up to 230 g/m². Printed pages collect in a 150-sheet face-down tray, while one sheet can exit face up.

A computer can connect through Hi-Speed USB 2.0, 10Base-T/100Base-TX Ethernet, or wireless networking. Wireless operation covers 2.4 GHz 802.11b/g/n and 5 GHz 802.11a/n, with Wi-Fi Direct on both bands for direct device links. The body measures 356 x 360 x 183 mm and weighs 7.3 kg with supplies installed, while average power draw is approximately 470 W during printing at 25 °C and ready mode sits around 43 W.