Brother HL-L1232W V Driver Download

Brother HL-L1232W V Driver prepares the computer to send print jobs to the monochrome laser engine during setup. After detection, the printer can receive jobs through USB or a wireless network. This is a printer-only model, so the installation does not add scanning, copying, or fax tools. Once setup is complete, printed pages follow the document settings chosen on the computer.

Brother HL-L1232W V Specifications

This monochrome laser printer uses a print-only chassis, with no scanner, copier, fax hardware, or automatic document feeder. Printing comes from an electrophotographic laser engine inside the desktop body. The supply system keeps the TN116 toner and DR116 drum separate. In the box, the starter black toner is rated for about 1,500 pages, and the drum is rated for around 10,000 pages.

Print resolution reaches up to 2400 x 600 dpi. Single-sided output runs at up to 20 ppm on A4 paper or 21 ppm on Letter. From ready mode, the first page comes out in less than 10 seconds under the stated test condition. Automatic duplex printing is not built into the paper path, so two-sided documents require manual turning.

Paper feeds from a 150-sheet standard tray. Printed sheets collect in an output area rated for up to 50 sheets when 80 g/m² paper is used. The tray accepts A4, Letter, Legal, Legal 2, Executive, A5, and B5 sizes. Brother lists plain and recycled paper for this feed. Paper weight runs from 65 to 105 g/m², with no separate rear feed or specialty-media path specified.

A wired setup can use high-speed USB 2.0 or Ethernet. Wireless networking works on 2.4 GHz and 5 GHz Wi-Fi bands. Wireless Direct gives compatible devices a direct wireless route without using the local network. Mobile printing is listed through AirPrint, Mopria, and Brother Mobile Connect. Inside the printer, a 600 MHz processor works with 64 MB of standard memory. The body measures 340 x 238 x 189 mm, and the listed weight is 4.6 kg.