Brother HL-L1228 Driver Download

Brother HL-L1228 Driver helps the computer communicate correctly with this monochrome laser printer. The hardware is built for printing only, so setup does not involve scanning, copying, or fax tasks. After the computer recognizes the printer, print jobs can move through its supported connection. Correct driver support keeps page output, command transfer, and device response consistent.

Brother HL-L1228 Specifications

The Brother HL-L1228 is a print-only monochrome laser printer built around an electrophotographic laser engine. Its controller carries 1 MB of standard memory, which separates it from the wireless models in the same documentation. Because the hardware stops at printing, it has no scanner, copier, fax unit, or automatic document feeder. Power input is specified at 220 to 240 V AC, 50/60 Hz.

Print resolution reaches 600 x 600 dpi when the best print-quality setting is selected. Single-sided output runs at up to 20 pages per minute on A4 paper and up to 21 pages per minute on Letter. From ready mode and the standard tray, the first page comes out in less than 10 seconds at 23 °C, although print speed can vary with document type.

Paper enters through one standard tray that holds up to 150 sheets of 80 g/m² plain paper. The feed is for plain or recycled sheets, with supported weight from 65 to 105 g/m², and it accepts A4, Letter, Legal, Folio, A5, A5 long-edge, B5 JIS, B5 ISO, Executive, and 16K. Printed pages collect face down, with the output tray taking up to 50 sheets.

A nearby computer connects through a USB Type-B receptacle using USB 2.0 Full-Speed, and Brother specifies a cable length of no more than 2 metres. The machine can also work with a USB 1.1 computer interface, but third-party USB hub devices are not supported. The body measures 340 x 189 x 238 mm, weighs 4.6 kg with supplies, and omits wireless LAN support.