Brother HL-L1222 V Driver Download

Brother HL-L1222-V Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After setup, print commands can travel through the supported connection. The software manages printing only, because the hardware has no scanner, copier, or fax section. Device recognition, command transfer, and printed output stay tied to the active setup.

Brother HL-L1222-V Specifications

Brother HL-L1222-V works as a monochrome laser printer only, with no scanner, copier, ADF, or fax hardware in the body. Printing comes from a compact black-and-white laser engine inside the small desktop chassis. Standard memory is 1 MB. Brother lists no optional memory expansion. The control layout stays minimal, while the Brazilian 127 V version uses separate TN116BR toner and DR116BR drum supplies.

Print resolution is 600 × 600 dpi, and single-sided output reaches up to 20 ppm on A4 paper or 21 ppm on Letter. First-page output is listed at about 10 seconds. The printer uses Brother’s TN116BR toner. Starter toner yield is approximately 1,500 pages. Replacement black toner is listed for about 1,000 pages under ISO/IEC 19752 conditions, while the DR116BR drum remains a separate supply.

Paper input comes through a 150-sheet tray, and output capacity is 50 sheets, with both capacity figures based on 75 g/m² paper. Brother lists duplex paper sizes as Letter, Legal, Executive, A4, A5, and B5, although the product page does not identify automatic duplex hardware. With no flatbed scanner or automatic document feeder, paper handling covers printed pages only and stays centered on cut-sheet office media.

Connectivity is limited to Hi-Speed USB 2.0, with no Ethernet or wireless interface listed for this variant. Monthly duty cycle reaches up to 12,000 pages, while Brother gives a recommended monthly volume up to 5,000 pages. The printer measures 340 × 238 × 189 mm and weighs 4.6 kg, while power use is 380 W when printing, 40 W in ready mode, 0.5 W in deep sleep, and 0.28 W when off.