Brother HL-L5202DW Driver Download

Brother HL-L5202DW Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After installation, print commands can travel through the selected USB, wired network, or wireless connection. The software manages printing only, because the hardware has no scanner, copier, or fax section. Device recognition, command transfer, and printed output stay tied to the active setup.

Brother HL-L5202DW Specifications

Brother HL-L5202DW works as a monochrome laser printer only, with no scanner, copier, ADF, or fax hardware in the chassis. Printing comes from an electrophotographic laser engine and separate toner and drum supplies. Standard memory is 256 MB, while a 16-character single-line LCD handles menu and status feedback, and the print-only design keeps every hardware control tied to paper output rather than document capture.

Print resolution reaches 1200 × 1200 dpi, with HQ1200 quality at 2400 × 600 dpi and a standard 600 × 600 dpi mode. Single-sided output runs up to 42 ppm on Letter paper and 40 ppm on A4. Duplex hardware prints both sides automatically. Duplex speed reaches 20 sides per minute on Letter or A4. First print time is less than 7.2 seconds from ready mode through the standard tray.

Paper input comes through a 250-sheet standard tray for A4, Letter, A5, A5 long-edge, A6, Executive, Legal, Folio, Mexico Legal, and India Legal. For specialty media, the 50-sheet multipurpose tray takes letterhead, colored paper, thick stock, bond paper, labels, envelopes, and custom media from 3 to 8.5 inches wide. Printed sheets collect in a 150-sheet face-down tray, while the rear face-up path exits one sheet at a time.

Automatic two-sided printing accepts Letter, Legal, Mexico Legal, India Legal, and Folio sheets in plain, letterhead, colored, thin, or recycled weights from 60 to 105 g/m². Connectivity combines Hi-Speed USB 2.0, Gigabit Ethernet through 10BASE-T, 100BASE-TX, or 1000BASE-T, wireless LAN using IEEE 802.11 b/g/n, and Wi-Fi Direct through IEEE 802.11 g/n. The body measures 373 × 388 × 255 mm, weighs 10.7 kg with supplies, and draws about 620 W while printing.