Brother HL-L1808W Driver Download

Brother HL-L1808W Driver helps the computer communicate correctly with this print-only monochrome laser printer. During setup, the driver lets the computer recognize the device and send print jobs through a wired or wireless connection. The hardware is limited to printing, so scanning, copying, and faxing are not part of the setup. Once configured, page commands and layout handling remain consistent.

Brother HL-L1808W Specifications

The Brother HL-L1808W is a print-only monochrome laser printer for black document output. Printing comes from an electrophotographic laser engine, and the controller carries 64 MB of standard memory. Because the hardware has no scanner, copier, fax, or automatic document feeder, originals never enter a capture path. Brother specifies power input at 220 to 240 V AC, 50/60 Hz. With supplies installed, the unit weighs 4.6 kg.

Print resolution starts at a physical 600 x 600 dpi, while the best print quality reaches 2400 x 600 dpi. Single-sided output runs at up to 20 pages per minute on A4 paper and up to 21 pages per minute on Letter. From ready mode and the standard tray, the first page comes out in less than 10 seconds, measured at 23 °C.

Paper input comes through one standard tray that holds up to 150 sheets of 80 g/m² plain paper. The tray accepts plain or recycled paper in A4, Letter, Legal, Folio, A5, A5 long-edge, B5 JIS, B5 ISO, Executive, and 16K sizes. Paper weights run from 65 to 105 g/m². No separate manual feed slot sits on this model. Finished pages collect face down in a 50-sheet output tray.

A computer can connect through a Hi-Speed USB 2.0 Type-B port. Wireless networking works on both 2.4 GHz and 5 GHz bands. Infrastructure mode covers IEEE 802.11a/b/g/n, while Wireless Direct uses IEEE 802.11a/g/n. The body measures 340 x 238 x 189 mm. Average power use is about 380 W while printing, 40 W in ready mode, 2.4 W in sleep, and 1.2 W in deep sleep.