Brother HL-L2310D Driver Download

Brother HL-L2310D Driver helps the computer communicate correctly with this print-only monochrome laser printer. During setup, the driver lets the computer recognize the device and send print jobs through the connected cable. The hardware is limited to printing, so scanning, copying, and faxing are not part of the setup. Once configured, page commands and layout handling remain consistent.

Brother HL-L2310D Specifications

The Brother HL-L2310D is a print-only monochrome laser printer using an electrophotographic laser engine. Hardware functions stay limited to printing, so scanning, copying, faxing, and automatic document feeding sit outside this single-function design. The controller carries 32 MB of standard memory for print processing. Brother specifies 220 to 240 V AC, 50/60 Hz power input. With supplies installed, the compact body weighs 7.2 kg.

Print resolution reaches 600 x 600 dpi, HQ1200 quality at 2400 x 600 dpi, and 1200 x 1200 dpi. Single-sided output runs at up to 30 pages per minute on A4 paper or up to 32 pages per minute on Letter. The standard tray feeds automatic two-sided printing, while duplex output reaches up to 15 sides per minute on A4 or Letter.

Paper input comes through a 250-sheet standard tray for plain, thin, recycled, and thick paper. The tray accepts A4, Letter, A5, A5 long-edge, A6, and Executive sizes. The manual feed slot takes envelopes, labels, bond paper, thicker stock, and custom sizes from 76.2 to 215.9 mm by 127 to 355.6 mm. Finished pages collect in a 150-sheet face-down output tray, while one sheet can exit face up at the rear.

A wired setup uses Hi-Speed USB 2.0 as the built-in computer connection. Brother reserves Ethernet for other variants in the documentation. The documentation does not assign Wireless LAN or Wi-Fi Direct to this model. The closed outline measures 356 x 360 x 183 mm. Power use is about 460 W while printing, 48 W in ready mode, 5.7 W in sleep, 0.6 W in deep sleep, and 0.03 W when powered off.