Brother MFC-L2835DW Driver Download

Brother MFC-L2835DW Driver lets the computer communicate properly with this monochrome multifunction printer. The software connection is needed for printing as well as sending scans back to the computer. Copying can be carried out at the machine, and fax functions remain part of its multifunction hardware. When the printer is recognized correctly, computer-based print settings and document output can pass to the machine as intended.

Brother MFC-L2835DW Specifications

The Brother MFC-L2835DW is a monochrome multifunction laser printer for printing, scanning, copying, and faxing. Printing comes from an electrophotographic laser engine backed by 128 MB of memory. A two-line, 16-character LCD provides access to local settings. Above the flatbed sits a 50-sheet automatic document feeder, so multi-page originals do not need to be placed on the glass one at a time. With supplies installed, the machine weighs 11.6 kg.

Single-sided printing reaches 32 pages per minute on A4 paper and 34 pages per minute on Letter. Automatic duplex printing is built into the paper path. For finer output, print resolution reaches 1200 x 1200 dpi, and the first page can emerge in under 8.5 seconds from Ready mode. Scanning from the flatbed also reaches 1200 x 1200 dpi. Originals passing through the ADF scan at up to 600 x 600 dpi instead.

The main paper tray holds up to 250 sheets of 80 g/m² plain paper. Common office sizes such as A4, Letter, A5, A6, B5, and Executive fit there. A separate manual feed slot accepts one sheet when an envelope, label, bond sheet, or heavier stock needs a straighter path. Printed pages collect face down in the 120-sheet output tray. Automatic duplex printing uses A4 paper from 60 to 105 g/m².

A nearby computer can use the Hi-Speed USB 2.0 connection. Wired network installations connect through 10Base-T or 100Base-TX Ethernet. For wireless jobs, the printer communicates over IEEE 802.11a/b/g/n networks on 2.4 GHz and 5 GHz bands. Wi-Fi Direct can link a compatible device without sending the job through the normal network. The closed body measures about 410 x 399 x 319 mm. Power use averages about 470 W during printing and 43 W in Ready mode.