Brother HL-L5102DW Driver Download

Brother HL-L5102DW Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After setup, print commands can travel through the selected USB, wired network, or wireless connection. The software manages printing only, because the hardware has no scanner, copier, or fax section. Device recognition, command transfer, and printed output stay tied to the active setup.

Brother HL-L5102DW Specifications

Brother HL-L5102DW works as a monochrome laser printer only, with no scanner, copier, ADF, or fax hardware in the chassis. Printing relies on an electrophotographic laser engine for black-and-white output only. Standard memory is 256 MB, while a 16-character, single-line LCD handles menu and status feedback. The print-only body uses separate toner and drum supplies, so document handling stays limited to printed output.

Print resolution reaches 1200 × 1200 dpi, with PCL6, BR-Script3, IBM Proprinter XL, Epson FX-850, PDF 1.7, and XPS 1.0 emulations. Single-sided output runs up to 42 ppm on Letter paper and 40 ppm on A4. Automatic duplex hardware prints both sides without manual turning. Duplex speed reaches 20 sides per minute on Letter or A4. First print time is less than 7.2 seconds from ready mode through the standard tray.

Paper input comes through a 250-sheet standard tray for A4, Letter, A5, A5 long-edge, A6, Executive, Legal, Folio, Mexico Legal, and India Legal. For flexible feeds, the 50-sheet multipurpose tray takes letterhead, colored paper, thick stock, bond paper, labels, envelopes, and custom media from 3 to 8.5 inches wide. Printed sheets collect in a 150-sheet face-down tray, while the rear face-up path exits one sheet at a time.

Automatic two-sided printing accepts Letter, Legal, Mexico Legal, India Legal, and Folio sheets in plain, letterhead, colored, thin, or recycled weights from 60 to 105 g/m². Connectivity combines Hi-Speed USB 2.0, 10BASE-T/100BASE-TX Ethernet, wireless LAN using IEEE 802.11 b/g/n, and Wi-Fi Direct through IEEE 802.11 g/n. The body measures 373 × 388 × 255 mm, weighs 10.7 kg with supplies, and draws about 620 W while printing.