Brother HL-L2461DN Driver Download

Brother HL-L2461DN Driver lets the computer identify this monochrome laser printer and send print jobs to the correct machine. After installation, print commands can use the layout and output settings selected on the computer. A nearby computer can connect through USB, while wired network setup lets the printer receive jobs over Ethernet. The driver carries those print instructions to the printer before each document is produced.

Brother HL-L2461DN Specifications

The Brother HL-L2461DN is a print-only monochrome laser printer, so scanning, copying, faxing, and automatic document feeding are not part of the hardware. Printing comes from an electrophotographic laser engine with PCL6 emulation, backed by 128 MB of standard memory. A 16-character, one-line LCD handles menu and status work, while the body measures 356 mm wide, 360 mm deep, and 183 mm high with supplies fitted.

Print resolution reaches up to 1200 x 1200 dpi. Single-sided output runs at up to 34 pages per minute on A4 and 36 pages per minute on Letter. From ready mode, the first page comes out in less than 8.5 seconds. Automatic duplex printing is standard, with two-sided output reaching 16 sides per minute on A4 and 17 sides per minute on Letter.

Paper input comes through a 250-sheet tray for 80 gsm plain paper, together with a one-sheet manual feed slot for envelopes and heavier media. The tray takes plain, thin, recycled, and thick paper. Sizes include A4, Letter, Legal, Folio, Executive, A5, A6, B5, B6, 16K, and A4 Short. Printed pages collect in a 150-sheet face-down output tray, while one face-up sheet exits through the rear path.

Connectivity runs through Hi-Speed USB 2.0 and 10Base-T/100Base-TX Ethernet, but this DN model does not carry wireless LAN or Wi-Fi Direct hardware. Power requirements are 220 to 240 V AC at 50/60 Hz outside Taiwan for operation. Brother lists average use at about 470 W while printing, about 43 W in ready mode, 3.8 W in sleep, and 0.08 W when powered off.