Brother HL-5472DWT Driver Download

Brother HL-5472DWT Driver lets the computer recognize this print-only laser printer and send jobs to it correctly. After installation, print commands can travel through the selected USB, wired network, or wireless setup. The software manages printing only, because the hardware has no scanner, copier, or fax section. Device recognition and output handling stay tied to the active connection.

Brother HL-5472DWT Specifications

Brother HL-5472DWT is a monochrome laser printer built only for printing. The chassis has no scanner, copier, or fax hardware. Printing comes from an electrophotographic laser engine, and the printer controller starts with 128 MB of memory. A 144-pin DDR2 SO-DIMM slot can raise memory to 256 MB. A 16-character, single-line LCD shows menu and status messages. The taller DWT body includes the second paper tray as standard hardware.

Print resolution reaches 1200 × 1200 dpi. HQ1200 quality produces 2400 × 600 dpi output, and standard jobs can use 600 × 600 dpi mode. Single-sided printing runs up to 40 ppm on Letter paper and 38 ppm on A4. Automatic duplex printing reaches 18 sides per minute. First print time is listed at under 8.5 seconds at 73.4 °F, and the emulation set includes PCL6, BR-Script3, IBM ProPrinter XL, and Epson FX-850.

Paper input starts with a 500-sheet standard tray for plain, thin, or recycled stock. Supported sizes include Letter, A4, Legal, Folio, Executive, A5, B5, B6, and A6. A 50-sheet multipurpose tray takes thicker paper, bond paper, labels, and envelopes. Custom media in that feed path may measure from 3 to 8.5 inches wide. Printed pages collect in a 150-sheet face-down output tray, and the rear face-up path exits one sheet at a time.

Automatic two-sided printing accepts Letter, Legal, and Folio paper. Duplex media must be plain, thin, or recycled stock from 16 to 28 lb. A nearby computer can connect through Hi-Speed USB 2.0. Network printing can use 10BASE-T/100BASE-TX Ethernet or IEEE 802.11 b/g/n wireless LAN in infrastructure mode. With consumables installed, the chassis measures 14.6 × 15.1 × 15.2 inches and weighs 30.0 lb. Power draw is about 727 W while printing, with peak consumption near 1200 W.