Epson WorkForce Pro WP-4592 Driver Download

Epson WorkForce Pro WP-4592 Driver establishes communication between the computer and this multifunction printer. A nearby computer can connect through USB, while Ethernet places the machine on a wired network. Correct installation gives the operating system access to printing, scanning, copying, and faxing. It also prevents recognition problems that can stop jobs or ignore selected document settings.

Epson WorkForce Pro WP-4592 Specifications

Epson WorkForce Pro WP-4592 is a multifunction color inkjet, so the same body prints, scans, copies, and faxes. Printing comes from a four-color MicroPiezo printhead with separate DURABrite Ultra cartridges for black, cyan, magenta, and yellow. Epson lists 677 standard-capacity supplies and 678 high-capacity replacements for this model. The control panel carries a 2.5-inch color LCD. For originals, the flatbed takes one sheet at a time, while the automatic document feeder is meant for stacked pages.

Print resolution reaches 4800 x 1200 optimized dpi, and the smallest ink droplet is 3 picoliters. ISO output is rated at 16 ppm in black and 11 ppm in color, before duplexing slows the pace. Two-sided printing runs at 9.2 ppm black or 7.1 ppm color. Scanning relies on a CIS sensor with 2400 dpi optical resolution, which fits office documents better than film or slide work. Copy controls allow 1 to 99 copies, 25 to 400 percent scaling, and originals up to legal size.

Paper feeds from a 250-sheet cassette and an 80-sheet rear feed, giving the machine 330 sheets before any add-on tray. The optional tray lifts total input to 580 sheets for heavier office use. The automatic document feeder holds 30 Letter or A4 sheets, but Legal originals drop to a 10-sheet limit. Duplex scanning is built into the ADF; Legal paper is the exception and must be handled differently. Plain sheets and envelopes use the paper paths, and Epson also lists presentation paper, glossy photo stock, adhesive sheets, and transfer paper.

A nearby computer can connect through Hi-Speed USB. Wired network setup uses Ethernet at 10BASE-T or 100BASE-TX speeds, and the front USB host port reads compatible storage devices for direct scanning. Built-in Wi-Fi is not listed for this regional version, so wireless placement is not part of the hardware. Printer language support goes beyond Epson ESC/P-R, adding PCL 5, PCL 6 emulation, and PostScript 3 for office environments. With the trays closed, the body measures 18.1 x 16.5 x 13.4 inches; during printing, it extends to 18.1 x 25.7 x 15.1 inches. The machine weighs about 30.4 pounds, and Epson rates the monthly duty cycle at 25,000 pages.