Brother HL-10W Driver Download

Brother HL-10W Driver gives the computer the software it needs to identify the printer during setup and regular use. This HL series machine is built for printing only, so the page should not mention scanning, copying, or faxing. After the connection is ready, the computer can send print jobs to the printer without treating it as unknown hardware. Proper driver communication also helps the printed output follow the selected settings.

Brother HL-10W Specifications

Brother HL-10W is a monochrome laser printer for printing only, with no scanner, copier, fax, or automatic document feeder. Its print engine relies on electrophotographic laser technology, while standard memory is 64 MB. The compact hardware stays focused on single-function output. Power requirements are 220 to 240 V AC at 50/60 Hz, and peak draw is about 1,056 W.

Print resolution begins at 600 x 600 dpi and rises to 2400 x 600 dpi in best mode. Single-sided output reaches up to 20 ppm on A4 paper or 21 ppm on Letter paper. From Ready mode at 23°C, the first page takes less than 10.0 seconds. Automatic duplex printing is not listed, so two-sided pages need manual handling.

The standard paper tray accepts plain or recycled paper from 65 to 105 g/m². Supported sizes include A4, Letter, Legal, Folio, A5, A5 long edge, B5 JIS, B5 ISO, Executive, and 16K at 195 x 270 mm. Capacity is up to 150 sheets of 80 g/m² plain paper. Printed pages leave face down, while the output area holds up to 50 sheets.

Connections cover USB and wireless networking rather than wired Ethernet. The USB interface is a Hi-Speed USB 2.0 Type-B port, and Brother specifies a cable no longer than 2 metres. Wireless LAN works through IEEE 802.11a/b/g/n in infrastructure mode. Wireless Direct uses IEEE 802.11a/g/n, while the body measures 340 x 238 x 189 mm with consumables installed and weighs about 4.7 kg.