Brother HL-1110 Driver Download

The Brother HL-1110 printer model belongs to the same family as the Brother HL-1112, both of which uses the laser electrophotographic print method. The inbuilt internal memory of the device is 1 MB of RAM for processing printing processes. Similarly, the power source involves a voltage range between 110 to 120 Volts of an alternating current with a 50/60 Hz frequency. However, for Argentina and Chile, the voltage range is between 220 and 240 volts AC at the same rate.

Brother HL-1110 Specifications

The power consumption of the device is mainly dependent on the current working mode of the printer such as a maximum of 1044 watts approximately at peak performance. In the same way, for Chile and Argentine, the approximate power consumption at the peak performance is 1056 watts. The standard printing takes about 380 watts of power at an average temperature of 25⁰C while the active mode of the printer consumes 40 watts of power at the same temperature.

The physical capacities of the Brother HL-1110 printer include a height of 7.4 inches, a depth of 9.4 watts and a width of 13.4 watts. The standard weight is about 9.9 lbs (about 4.5 kg) with a sound pressure of 51 dB and audio power of 6.60 B. there are a few requirements that should be in place for users to make the best out of this device. One of such factors is a temperature range between 10 and 32.5⁰C for operations and 0 to 40⁰C.

In terms of the humidity, the recommended range is between 20 and 80% for operations, without condensation but between 10 and 90% for storage. As an interface option, the standard procedure is through the USB 2.0 full speed port. To this effect, the manufacturer recommends using a USB cable that is not longer than 2 meters of type A/B.