HP LaserJet Pro 4007d Driver Download

HP LaserJet Pro 4007d Driver carries print instructions from the computer to this monochrome laser printer. A nearby computer can use the USB connection for setup and everyday printing. Once installed, the software passes choices such as page layout, paper size, and duplex settings to the printer. That communication matters because the 4007d is a print-only model, so the driver deals with printing rather than scan, copy, or fax functions.

HP LaserJet Pro 4007d Specifications

The HP LaserJet Pro 4007d is a monochrome laser printer built only for printing, so there is no scanner, copier, or fax unit inside. Black output comes from a single toner cartridge, with HP 162A and higher-yield HP 162X supplies available for replacement. Print processing runs on a dual-core 1.4 GHz processor. The control panel carries a 2.1-inch monochrome graphic LCD at 200 x 114 pixels.

On A4 paper, black documents can run at up to 45 ppm. From Ready mode, the first page may come out in as little as 3.8 seconds, which reduces the delay on short jobs. Maximum print quality reaches 1200 x 1200 dpi. Standard, Detailed, and Economode settings use 600 or 1200 dpi depending on the selected mode. HP rates the monthly duty cycle at up to 80,000 A4 pages, although the recommended monthly volume is no more than 4,200 pages.

Most paper sits in the 250-sheet Tray 2, and the 100-sheet multipurpose Tray 1 is available for smaller jobs or different stock. A 550-sheet Tray 3 can be added when more input capacity is needed. Printed sheets collect in a 150-sheet output bin, so the output side holds less paper than the standard input trays. Tray 1 takes stock from 60 to 200 g/m². Tray 2 and the optional third tray are limited to 60 to 120 g/m².

A nearby computer connects to the d variant through its Hi-Speed USB 2.0 device port. Built-in Ethernet and wireless networking are not present on this configuration. With the trays and covers closed, the body measures 369 x 375 x 193 mm. Space requirements increase during use, reaching about 369 x 557 x 302 mm, and the printer weighs roughly 7.6 kg with toner installed. Power draw is about 536 watts during active printing and falls to around 6.3 watts in Ready mode.