Epson WorkForce Pro WP-4520 Driver Download

The Epson WorkForce Pro WP-4520 printer model recommends using genuine Epson components, including the cartridges and maintenance boxes. In terms of the machine’s physical dimensions, it depends on whether the device is printing or in storage. For instance, when printing, the height is about 15.1 inches, about 383 mm. The printer’s width is approximately 18.1 inches (about 460 mm).

This package contains

• Printer Driver
• Scanner Driver and EPSON Scan Utility
• ICA Scanner Driver
• Event Manager
• Software Updater
• Fax Utility
• Network Installer

Epson WorkForce Pro WP-4520 Specifications

Also, the printer’s depth is about 25.7 inches (about 654 mm). However, when the machines are in storage, the height is approximately 13.4 inches, 16.5 inches in depth, while the height width is 18.1 inches. The supported range is between 100 and 240 volts concerning the power supply rating. On the other hand, the input voltage range supports between 90 and 264 volts with a rated frequency of 50/60 Hz. It also a current rate of about 0.7/0.35 A.

Specifically for the Epson WorkForce Pro WP-4520 printer model, the copying power usage is about 17 watts. When at the ready mode, this machine uses 7 watts, while the sleep mode uses approximately 2.4 watts. At the ‘power off’ way, the Epson WorkForce Pro WP-4520 model has a power consumption of 0.3 watts. In the right environment, the machine allows an operating range between 10 and 35⁰C, and the storage range is between -20 and 40⁰C.

The machine also supports a relative humidity between 40 and 60% with no condensation. This device’s network interface specifications include the IEEE 802.11 b/g/n with the wireless LAN standard. It also has the WPA-PSK (TKIP/AES) WPA2 compliant and WEP (64/128 bit). It also supports the frequency band of about 2.4 GHz. However, in faxing, the device’s modem speed is about 33.6 kbps. However, the faxing resolution depends on the faxing mode, including standard, fine, or photo mode.