Epson L606 Driver Download

Epson L606 Driver establishes communication between the computer and the printer for print and scan commands. Printing and scanning run through compatible computer applications, but copying stays under the printer’s own controls. A nearby computer can use the wired connection, and network jobs can travel over Wi-Fi. Once installed, the software lets the system identify the L606 and exchange documents without recognition errors.

Epson L606 Specifications

Epson L606 combines color printing with flatbed scanning and standalone copying. There is no fax modem or automatic document feeder, so each original must be placed on the glass by hand. Printing comes from a PrecisionCore inkjet engine supplied by four refillable tanks for black, cyan, magenta, and yellow ink. A 2.2-inch monochrome LCD and physical buttons control copying, maintenance, and network setup.

Print resolution reaches 4800 × 1200 optimized dpi. ISO output is rated at 13.7 ppm in black and 7.3 ppm in color, with slower speeds when automatic duplex printing is used. The flatbed scans A4 or Letter originals through a CIS sensor at 1200 × 2400 dpi hardware resolution. Copy settings permit up to 99 sheets and scaling from 25% to 400%.

Paper loads into a 150-sheet cassette rather than an exposed rear feed. The same cassette can hold up to 20 photo sheets or 10 envelopes, although output capacity drops to 30 plain sheets. Common office sizes range from A6 to Legal, and longer custom sheets can extend to 119.9 cm. Automatic two-sided printing is limited to compatible plain-paper sizes.

A nearby computer can connect through high-speed USB. Ethernet provides a wired network link, while Wi-Fi and Wi-Fi Direct carry wireless jobs. Phones and tablets can print through Epson iPrint, AirPrint, Mopria, and the supported Epson Connect services. With the trays closed, the body measures 51.5 × 36 × 20.5 cm and weighs about 6.6 kg. Opening the trays increases its depth to 55.9 cm.