Brother HL-L2402D Driver Download

Brother HL-L2402D Driver helps the computer communicate correctly with this monochrome laser printer. The hardware is built for printing only, with no scanner, copier, or fax function involved in setup. After the computer recognizes the printer, jobs can be sent through the selected connection. Correct driver support helps the system pass print commands and read printer status without treating the model as a multifunction device.

Brother HL-L2402D Specifications

The Brother HL-L2402D is a print-only monochrome laser printer with an electrophotographic laser engine. Its print controller carries 64 MB of memory for page processing. Because the hardware stops at printing, it has no scanner, copier, fax, or automatic document feeder. The compact body measures 356 mm wide, 360 mm deep, and 183 mm high. With supplies installed, the listed weight reaches 7.1 kg.

Print resolution reaches up to 1200 x 1200 dpi. Single-sided output runs at up to 30 pages per minute on A4 paper. Letter output reaches up to 32 pages per minute. From ready mode, the first page appears in less than 8.5 seconds. Automatic two-sided printing works with plain, thin, and recycled paper, and duplex output reaches 15 sides per minute on A4 or Letter.

Paper input comes through a 250-sheet standard tray for plain, thin, recycled, and thick paper. That tray accepts A4, Letter, Executive, B5, A5, A6, 16K, and A4 Short sizes. A one-sheet manual feed slot takes envelopes, labels, bond paper, thicker paper, and custom sizes. The custom range spans 76.2 to 215.9 mm wide and 127 to 355.6 mm long. Finished pages collect in a 150-sheet face-down tray.

USB is the only connection: a USB Type-B receptacle with USB 2.0 High-Speed operation. The hardware has no wired or wireless network interface. During operation, the printer draws about 440 W while printing and about 43 W in ready mode. Sleep mode draws 3.8 W, while deep sleep falls to 0.5 W. Power-off consumption is about 0.08 W, and supported operating conditions run from 10°C to 32.5°C with 20% to 80% humidity.