Brother HL-L2400DWE Driver Download

Brother HL-L2400DWE Driver helps the computer communicate correctly with this monochrome laser printer. The hardware handles printing only, so setup does not involve scanning, copying, or faxing. After the computer recognizes the printer, jobs can move through the supported connection. Correct driver support helps the system send pages and read device status without treating the model as multifunction hardware.

Brother HL-L2400DWE Specifications

The Brother HL-L2400DWE is a print-only monochrome laser printer with an electrophotographic laser engine. Its print controller carries 64 MB of standard memory. A 16-character, one-line display handles basic status and menu work. Because the hardware stops at printing, it has no scanner, copier, fax, or automatic document feeder. The body measures 356 mm wide, 360 mm deep, and 183 mm high. With supplies installed, the listed weight reaches 7.1 kg.

Print resolution reaches up to 1200 x 1200 dpi. Single-sided output runs at up to 30 pages per minute on A4 paper. Letter output reaches up to 32 pages per minute. From ready mode, the first page appears in less than 8.5 seconds. Automatic two-sided printing works with plain, thin, and recycled paper. Duplex output reaches up to 15 sides per minute on A4 or Letter media.

Paper input comes through a 250-sheet standard tray for plain, thin, recycled, and thick paper. That tray accepts A4, Letter, B5 JIS, B5 ISO, A5, A5 long edge, B6 JIS, A6, Executive, 16K, and A4 Short sizes. A one-sheet manual feed slot takes bond paper, labels, envelopes, and heavier media up to 230 g/m2. Finished pages collect in a 150-sheet face-down tray, while one sheet can use the face-up path.

USB 2.0 High-Speed connects through a USB Type-B receptacle. Wireless networking runs through IEEE 802.11a/b/g/n in infrastructure mode. Wi-Fi Direct uses IEEE 802.11a/g/n, but Ethernet is not listed for this exact model. The printer draws about 440 W while printing and 43 W in ready mode. Sleep mode draws 3.8 W, while deep sleep falls to 0.6 W. Supported operating conditions run from 10°C to 32.5°C with 20% to 80% humidity.