Brother DCP-L2541DW Driver Download

Brother DCP-L2541DW Driver helps the computer communicate correctly with this monochrome multifunction printer. The driver identifies the print, scan, and copy functions without adding fax support. A computer may connect through USB, Ethernet, or a wireless network, depending on the chosen setup. After installation, print jobs and scan commands can pass correctly between the computer and the machine.

Brother DCP-L2541DW Specifications

The Brother DCP-L2541DW is a monochrome laser multifunction printer for printing, scanning, and copying. Its electrophotographic laser engine works with 32 MB of memory, so the hardware uses toner rather than ink and prints only in monochrome. The control panel uses a 16-character, two-line LCD instead of a touchscreen. Single originals can sit on the flatbed glass, and stacked pages can feed through the 35-sheet automatic document feeder.

Standard print resolution is 600 x 600 dpi. Brother lists HQ1200 as equivalent to 2400 x 600 dpi quality. Single-sided A4 printing reaches up to 30 pages per minute, while the automatic duplex unit runs at up to 15 sides per minute. The flatbed scans at 600 x 2400 dpi, and the ADF scans at 600 x 600 dpi. Copies use 600 x 600 dpi, with 25% to 400% scaling and a 99-copy limit.

Paper loads from a 250-sheet standard tray for plain, thin, or recycled paper at 80 g/m². It takes A4, Letter, A5, A5 Long Edge, A6, and Executive sizes. The manual feed slot handles one sheet at a time for envelopes, labels, bond paper, or thicker media. Printed pages collect in a 100-sheet face-down tray, and a separate face-up path handles one sheet.

With the trays closed, the machine measures 409 mm wide, 398.5 mm deep, and 316.5 mm high. Weight with supplies is 11.2 kg. A wired setup can run through 10Base-T/100Base-TX Ethernet, or a nearby computer can connect through Hi-Speed USB 2.0. Wireless networking uses IEEE 802.11b/g/n, and Wi-Fi Direct creates a direct wireless link. During printing, power use is about 510 W.