Epson SureColor G9070 Driver Download

Epson SureColor G9070 Driver lets the computer identify this wide-format direct-to-film printer and send jobs to it correctly. After the software is installed, the print queue can pass layout and output instructions through the chosen connection. The G9070 is a printer-only machine, so the driver setup has no scanner, copier, or fax component. Good driver communication matters most when a job needs to reach the printer with the same settings selected on the computer.

Epson SureColor G9070 Specifications

The Epson SureColor G9070 is a 64-inch DTFilm production printer, sold in the Production Edition as SCG9070PE. It does not contain scanner, copier, or fax hardware. Printing comes from a PrecisionCore Micro TFP printhead that can detect nozzle problems and adjust output during a job. Cyan, magenta, yellow, black, and white UltraChrome DF inks feed from separate 1.6 L packs. All five packs must remain installed because the printer also draws ink during maintenance.

Output resolution reaches 1,200 x 1,200 dpi. Epson measured print-engine throughput at up to 350 square feet per hour, although the working rate depends on the selected mode and production setup. The printhead can be replaced by the user rather than requiring permanent installation in the machine. Real-time nozzle compensation helps maintain output when a nozzle becomes unreliable. Automatic cleaning reduces manual checks during extended runs, but it still consumes ink from the installed packs.

One roll can use the full 64-inch printing width. The feed can also run two rolls together, provided their combined width stays within that limit. Both 2-inch and 3-inch cores fit the roll holders. A loaded roll may reach 9.84 inches in diameter and weigh as much as 99 lb, so changing heavy media requires suitable handling space. Material thickness can reach 0.5 mm. The take-up system winds the printed surface outward, and finished work must be cut separately because no integrated cutter is fitted.

A nearby computer connects through High-Speed USB 2.0. For shared production access, the printer carries a Gigabit Ethernet port, but no wireless network hardware is listed. With its stand and media system assembled, the unit measures 116 inches wide, 33 inches deep, and 63 inches high. That footprint is roughly 2,949 x 844 x 1,605 mm, and the listed weight is 815 lb. Power must come from a 200 to 240 V AC supply at 50 or 60 Hz, with operating current below 6.5 A.