Brother HL-5452DN Driver Download

Brother HL-5452DN Driver enables the operating system to identify the printer and send jobs using the correct Brother commands. After installation, the computer can communicate with the machine without assigning it a generic or mismatched profile. A model-specific driver may prevent stalled queues, missing-device alerts, and output errors linked to incorrect communication. The hardware performs printing only and has no scanner, copier, or fax unit.

Brother HL-5452DN Specifications

Brother HL-5452DN is a monochrome laser printer with no scanning, copying, or fax hardware. Printing comes from an electrophotographic laser engine. The machine starts with 64 MB of memory, and one DDR2 SO-DIMM slot raises the total capacity to 256 MB. Toner and drum units remain separate. Its print-only body has no flatbed, automatic document feeder, fax modem, or touchscreen.

Output resolution can reach 1200 x 1200 dpi. HQ1200 mode produces an effective 2400 x 600 dpi result, while the standard setting uses 600 x 600 dpi. Single-sided speed reaches 40 ppm on Letter paper or 38 ppm on A4. The built-in duplex unit prints up to 18 sides per minute. From ready mode, the first page exits in under 8.5 seconds under the stated test conditions.

Paper enters through a 250-sheet main tray or a 50-sheet multipurpose tray. An optional lower tray increases input capacity by another 500 sheets. The main tray takes Letter, A4, B5, A5, A5 long-edge, B6, A6, Executive, Legal, and Folio paper. For custom stock, the multipurpose feed accepts widths from 76.2 to 215.9 mm and lengths from 127 to 355.6 mm. It also handles envelopes and labels. Printed sheets collect in a 150-sheet face-down tray, with a separate face-up path at the rear.

A nearby computer can connect through Hi-Speed USB 2.0. Wired network access uses 10BASE-T or 100BASE-TX Ethernet, and no wireless interface is fitted. Brother specifies a USB Type A/B cable no longer than 2 metres, while the Ethernet port requires Category 5 or better cabling. With the body closed, the printer measures 371 x 384 x 245 mm. It weighs 10.5 kg with consumables installed and draws about 716 W during printing.