Brother DCP-7055 Driver

Brother DCP-7055 printer has an electrophotographic print engine uses the laser technology and an ARM9 of 200Hz speed. When the printer wakes up from the sleep mode, it takes less than 7 seconds but less than 27 seconds if it is waking from the Power ON function. The standard internal memory is about 32 MB of RAM for processing work and quality output.

Specifications

This printer also has an input paper tray capacity of 250 sheets of plain and legal paper while the manual input slot allows one layer at a time. The output tray, also, can hold up to 100 layers of printed sheets in a face-down formats and one layer in a face-up patter. The display component of the Brother DCP-7055 printer is a liquid crystal display (LCD) with supports for 16 characters on two lines. This LCD screen has a width of 1.85 inches and a length of 0.43 inches.

Further paper specifications also include the support for plain paper, legal, envelopes, transparencies, thin paper, thick, thick paper, recycled paper, and other common types. The prating resolution of the printer is about 600 x 600 dots per inch (dpi) and HQ1200 that is 2400 x 600 dpi at top quality. The media weight range for the standard tray is between 60 and 105 gsm and between 60 and 163 gsm for the manual feed slot.

Copying has an inbuilt multicopy feature or stacking that can take up to 99 copies from an original. The wake-up speed of copying is less than 12 seconds from the ready mode and 29 seconds from the sleep mode. Copying range is between 25% minimum reduction and 400% enlargement at maximum with gradual increments of 1%. It also supports multiple copies on a single page. This printer is generally capable of printing, scanning, copying, receiving and sending fax messages.