Brother DCP-1510 Driver

The classic Brother DCP-1510 printer has an inbuilt laser technology with an electrophotographic laser printing technology. The model belongs to a similar family series as the DCP-1512, MFC-1810, and MFC-1815 printers. The input power source of the printer is about 220 to 240 volts of alternating current at a frequency of 50/60 Hz.

Specifications

The average power consumption of the device at peak performance is approximately 1080 watts, and printing takes about 380 watts. All of the parameters of the power consumption are at an average temperature of 25⁰C. The active mode uses up to 40 watts of power and the at deep sleep uses approximately 0.8 watts.

The physical measurements of the Brother DCP-1510 printer have its width to be 385 mm, the depth is 340 mm, and the height of the device is 255 mm. Similarly, the weight of the printer is about 7.0 kg which makes it light enough for all the needed uses. There are critical, required environmental conditions under which the printer performs optimally. One of such include a temperature range between 10 to 32.5⁰C for operation and 0 to 40⁰C for storage.

The main channel of connectivity that this printer has is the hi-speed USB 2.0 port with which the manufacturer recommends a USB cable that is not longer than 2 meters in length. The scanning function takes only one sheet at a time without the automatic document feeder (ADF). This scanner glass has a range up to 300 m and a width that is up to 215.9 mm as well as a weight of 2.0 kg.

The copying width at maximum is 210 mm while the multicopy or stack can take up to 99 copies. The zoom range for reduction or enlargement is 25% and 400% respectively with gradual increments. The copy resolution also is about 600 x 600 dpi while the output time for the first page is less than 16 seconds at a temperature of 23⁰C and 230 volts.