Canon imageCLASS MF4150 Driver Download

As a private desktop printer, the Canon ImageCLASS MF4150 printer model uses a power source within 220-240 volts. This power specification also warrants a frequency of 50/60 Hz. But the specifications differ concerning different countries where the printer is in use. Also, the maximum power consumption is less than 710 watts at optimum operation. Concerning the warm-up time, it takes less than 9.0 seconds under normal circumstances.

Canon imageCLASS MF4150 Supported Toner Catridges

Toner Catridge Canon 104  : Yield upto 2,000 Pages

Also, the warm-up time may differ concerning the condition of the environment of the machine use. This Canon imageCLASS MF4150 machine weighs 13.4 kg with the inclusion of the toner cartridge. Another physical dimension of the device includes a height of 370 mm and a depth of 432 mm. The width of the machine is 390 mm, with the inclusion of the document feeder. In a typical environment, the device supports a temperature range between 7.5 and 35⁰C.

Also, the environment must support a relative humidity range between 5 and 90% with no condensation. Its display languages also include German, English, French, Spanish, Italia, Swedish, Hungarian, Danish, Slovene, Hungarian, Portuguese, Czech, and many more. On the other hand, the printable area of the paper allows a 6mm margin on the top and bottom sides. Whereas the right- and left-hand sides of the article have a 5 mm margin.

The applicable lines of the Canon imageCLASS MF4150 printer include the Public Switched Telephone Network (PSTN) that supports 28.8 kbps modem speed. It also supports a Super G3 processor for faxing and scanning. The data compressions schemes include support for MH, MR, and MMR and support automatic fallback. Besides, there is a transmission speed of approximately 3 seconds per page while transmitting from the memory. The standard fax resolution is eight pels per mm by 7.7 lines per mm.