Brother MFC-L3768CDW Driver Download

Brother MFC-L3768CDW Driver helps the computer communicate correctly with this colour multifunction printer. Once the software is installed, the computer can recognize the machine for print jobs, scan input, and fax-related work. A USB connection suits one nearby computer, while network setup lets print and scan commands reach the machine across a wired or wireless setup. Copying still runs from the printer’s own control panel, so the computer driver mainly affects the print, scan, and fax tools used from the connected system.

Brother MFC-L3768CDW Specifications

The Brother MFC-L3768CDW is a colour LED multifunction machine for printing, scanning, copying, and faxing. Its electrophotographic LED print engine uses 512 MB of memory. Local settings and job controls appear on a 3.5-inch colour touchscreen. A 50-sheet automatic document feeder sits above the flatbed, so a stack of originals can pass through without placing each page on the glass. Fax transmission uses a modem rated at up to 33,600 bps.

Normal print resolution is 600 x 600 dpi, with Brother’s higher-quality setting producing output at 600 x 2400 dpi. A4 printing reaches 26 pages per minute in either black or colour. Duplex jobs run more slowly at up to 10 sides per minute. The flatbed can scan colour or black originals at 1200 x 1200 dpi. Through the document feeder, scanning resolution is limited to 600 x 600 dpi.

The main paper cassette holds 250 sheets of 80 g/m² plain paper and accommodates common sizes from A6 through Legal, including A4 and Letter. Less frequently used stock goes through the single-sheet manual feed slot instead. That feed can take envelopes and labels, as well as bond, glossy, and heavier paper. Finished pages leave the machine face down in a 150-sheet output area. Automatic duplex printing is intended for A4 stock from 60 to 105 g/m².

A nearby computer can connect over Hi-Speed USB 2.0, and Gigabit Ethernet serves a wired network. Wireless operation can use either the 2.4 GHz or 5 GHz band. Wi-Fi Direct gives compatible devices a direct wireless route without relying on the normal network connection. The front USB interface can also print supported files without first sending them from a computer. The chassis is approximately 410 mm wide, 401 mm deep, and 444 mm high, with installed supplies bringing its weight to about 20.0 kg. During printing, average power consumption is approximately 560 W at 25°C.