Brother MFC-L2922DW Driver Download

Brother MFC-L2922DW Driver helps the computer set up this monochrome laser multifunction printer for print, scan, copy, and fax work. Once the driver is in place, the computer can recognise the laser engine, scanner, copier, and fax hardware as parts of the same machine. A wired connection suits one nearby computer. For wireless use, jobs can travel over the network without moving the printer close to the desk. That setup helps documents reach the machine with the correct print settings instead of treating it as a basic unknown device.

Brother MFC-L2922DW Specifications

The Brother MFC-L2922DW is a monochrome electrophotographic laser multifunction printer built for printing, scanning, copying, and faxing. The controller carries 256 MB of memory, and the 3.5-inch TFT colour touchscreen sits at the front for daily settings. Scanning relies on the flatbed for single originals. For multipage work, the 50-sheet automatic document feeder can also read both sides of a sheet without manual turning.

Print resolution reaches up to 1200 x 1200 dpi. Single-sided pages run at 34 ppm on A4 or 36 ppm on Letter, so ordinary text jobs move quickly once the engine starts. Automatic duplex printing is slower, at 16 ppm on A4 and 17 ppm on Letter. From Ready mode, the first page comes out in under 8.5 seconds. The scanner reads up to 1200 x 1200 dpi from the glass, while ADF scans top out at 600 x 600 dpi.

Paper loading starts with a 250-sheet standard tray for plain, thin, recycled, and thick paper. A separate manual feed slot takes one sheet at a time, which matters for envelopes, labels, bond paper, or heavier stock up to 230 g/m2. Printed sheets land in the 120-sheet face-down output tray. For automatic two-sided printing, the machine narrows the choice to A4 plain, thin, or recycled paper.

A nearby computer can connect through Hi-Speed USB 2.0. Office networks can use 10Base-T/100Base-TX Ethernet instead, while wireless jobs travel over dual-band Wi-Fi. Wi-Fi Direct helps when a device needs to print without joining the router, and NFC is available for supported tap-based use. Faxing runs through a 33,600 bps modem, with two-sided fax sending handled from the ADF. With supplies installed, the body measures 410 x 421 x 319 mm and weighs about 11.8 kg.