Brother MFC-L2920DW Driver Download

Brother MFC-L2920DW Driver lets the computer communicate with the machine for printing, scanning, copying, and faxing. Once installed, the operating system can recognise the multifunction hardware and send jobs to the correct function. A nearby computer can use a wired connection, or jobs can reach the machine over its wireless network. The driver also carries the settings needed for print and scan tasks, helping the computer and printer exchange data correctly.

Brother MFC-L2920DW Specifications

The Brother MFC-L2920DW is a monochrome laser multifunction printer with print, scan, copy, and fax hardware. Its electrophotographic laser engine handles black-and-white output, backed by 256 MB of memory for everyday print and scan jobs. The 3.5-inch colour touchscreen sits on the control panel for menu access and walk-up tasks. Scanning relies on a flatbed for single originals, while the 50-sheet ADF feeds multipage documents without lifting the lid each time.

Print detail reaches up to 1200 x 1200 dpi. Plain one-sided pages run at up to 34 ppm on A4 paper and 36 ppm on Letter paper. For two-sided documents, automatic duplex printing reaches up to 16 ppm on A4, so longer jobs take more time than single-sided output. From Ready mode, the first printed page comes out in under 8.5 seconds. The scanner reads at 1200 x 1200 dpi from the glass, but ADF scanning uses 600 x 600 dpi.

Paper loading starts with a 250-sheet standard tray for plain, thin, recycled, and thick paper. That tray suits regular office documents better than frequent media changes. A manual feed slot takes one sheet at a time when envelopes, labels, bond paper, or heavier stock are needed. Media through that slot can reach up to 230 g/m2. Finished pages collect in a 120-sheet face-down output tray, and thicker stock can leave through the single-sheet face-up path for a straighter exit.

A nearby computer can connect through USB 2.0. Network use can run over 10Base-T/100Base-TX Ethernet, Wi-Fi, or Wi-Fi Direct, with NFC available for compatible touch-based setup. The fax modem runs at 33.6 Kbps, and two-sided fax sending can feed from the ADF. Copy output reaches 600 x 600 dpi, with stacking for up to 99 pages. With supplies fitted, the body measures 410 x 319 x 421 mm and weighs 11.8 kg. Peak power use reaches about 920 W during heavy operation.