Brother HL-L2357DW Driver Download

Brother HL-L2357DW Driver helps the computer communicate correctly with this print-only monochrome laser printer. During setup, the driver lets the computer recognize the device and send print jobs through the chosen connection. The hardware is limited to printing, so scanning, copying, and faxing are not part of the setup. Once configured, page commands and layout handling remain consistent.

Brother HL-L2357DW Specifications

This print-only monochrome laser printer uses an electrophotographic laser engine, with all hardware functions limited to printed output. Because the hardware has no scanner, copier, fax, or automatic document feeder, originals never enter a scanning path. The controller carries 64 MB of standard memory, while the front panel presents status and menu work on a 16-character, one-line LCD. Power input is specified at 220 to 240 V AC, 50/60 Hz.

Print resolution can run at 600 x 600 dpi or 1200 x 1200 dpi. HQ1200 mode raises the listed quality to 2400 x 600 dpi, so the resolution choices stay within the print engine rather than a scanning system. Single-sided output reaches up to 30 pages per minute on A4 paper and up to 32 pages per minute on Letter.

Automatic two-sided printing runs at up to 15 sides per minute, while the first page comes out in less than 8.5 seconds from ready mode. Paper input starts with a 250-sheet standard tray for plain A4, Letter, A5, A5 long-edge, A6, and Executive sizes. For individual sheets, the manual feed slot accepts bond paper, labels, envelopes, and thicker stock.

That manual slot works with custom sizes from 76.2 to 215.9 mm wide and 127 to 355.6 mm long. Finished pages collect in a 150-sheet face-down output tray, while a rear face-up path accepts one sheet. A computer can connect through Hi-Speed USB 2.0. Wireless networking runs through IEEE 802.11b/g/n infrastructure mode, and Wi-Fi Direct uses IEEE 802.11g/n.