Brother DCP-J925DW Driver Download

This product is one of the classic products of the Brother brad as it has modern features and an economic low ink advantage. The print heads are of two types; there is a printhead for monochrome, that is the piezo with 210 from one nozzle while the nozzle for the color printhead is three, the internal memory ability of the printer 64 MB of RAM.

Brother DCP-J925DW Specifications

The control panel of the printer has a liquid crystal display (LCD) touchscreen 3.3 inches in diagonal while the same TFT component is in color LCD. The source of power for the printer to perform well and correctly is the alternating current (AC) of a voltage between 220 and 24 volts at a frequency is 50/60 Hz. An exception to that rule is the printer in use in Taiwan that requires only an AC voltage between 100 and 120 volts.

The rate at which this printer consumes power depends on which operation is currently in place. For instance, the copying function consumes approximately 24 watts; the ready mode can run at a power demand of 6.5 watts. The sleep mode requires an employ a power usage of about 2.5 watts and switches off itself after some seconds.

Physically, the dimensions of the printer involve a body of height 180 mm, a width of 405 mm, and a depth of 374 mm. The weight of the printer itself is about 9.3 kg. The operating noise of the printer is about 50 dB or even lesser. This device has support for an automatic document folder (ADF) that can hold up to 15 pages of paper or even up to 20 pages under certain special conditions.

The supported media types in this printer include envelopes, plain sheet, thick, thin, thicker, A5, A6, executive, envelopes, and monarch. The maximum input paper capacity is approximately 100 sheets with a standard weight of 80 gsm.