Brother PJ-522 driver download

There are only two ways to connect this printer model with the computer. It can either be through the USB cable which must not be longer than 2 meters or through the infrared (IrDA) component. These two ways are only characteristic of the Brother PJ-522 and PJ-523, but the other model in the PocketJet series, the Brother PJ-562 and PJ-563 has an additional option of a wireless Bluetooth connection. It is however imperative to install the appropriate drivers before connecting the printer to the PC.

Brother PJ-522 printer driver Supported Windows Operating Systems

Specifications

The printer has controllable printer features such as auto-on, auto-off, and pre-feed — also, the compatible paper sizes such as a letter, legal, A4, A5 and custom sizes. The physical dimensions include a width of 255 mm, a depth of 55 mm and the height is about 30 mm while the weight is about 390 g. On one side, the printing method is through direct thermal printing, while on the other hand, the resolution is about 203 x 200 dots per inch (dpi).

The speed of the printer is approximately 24 seconds per page or 12.4 mm per second, that is under standard environmental factors. The printable area supports a configuration with printer drivers of 105 mm x 25.4 mm. The paper size concerning the paper sizes is appropriate to A4, legal and letter. The printer also has a rechargeable Ni-MH battery that supplies up to 14.4 Volts and even an AC adapter that supplies 15 volts of current. The third power option is two types of cigarette car adapter and the wired kind of connection.

The battery yield is approximately 70 sheets of paper with a 5% printing duty with a density of 5 with a fully charged new battery. The standard USB port is the viable means of connectivity with the version 2.0 full speed port.