Brother MFC-L5710DN Driver Download

Brother MFC-L5710DN Driver lets the computer communicate with this multifunction laser machine for print, scan, copy, and fax work. A wired network connection can place it on an office network, while USB suits one nearby computer. After setup, print jobs use the correct queue instead of stopping at the operating system. Scan jobs need the same driver link to reach the computer, and fax commands depend on that connection before the machine can send them.

Brother MFC-L5710DN Specifications

The Brother MFC-L5710DN is a monochrome laser all-in-one for printing, scanning, copying, and faxing. Its electrophotographic laser engine has 512 MB of standard memory behind it. Local controls sit on a 3.5-inch TFT colour touchscreen. For batches of originals, the scanner has a 50-sheet automatic document feeder rather than relying only on the glass. Fax transmission uses a 33,600 bps modem.

Printing reaches 1200 x 1200 dpi. On plain paper, the engine can produce up to 48 pages per minute with Letter sheets and 46 ppm with A4. The first page takes less than 6.7 seconds from ready mode, which matters more for short jobs than the maximum continuous speed. The scanner reads at 1200 x 1200 dpi from the flatbed. Originals fed through the ADF are scanned at up to 600 x 600 dpi, and software interpolation can raise the recorded resolution to 19200 x 19200 dpi.

The main cassette holds 250 sheets, with another 100 sheets feeding from the multipurpose tray. Standard office sizes such as Letter, Legal, A4, A5, and A6 are accepted, along with Executive, Folio, B5 JIS, and 16K. The multipurpose feed is also the place for envelopes, labels, and bond stock. Automatic duplex printing uses suitable plain, letterhead, coloured, thin, or recycled paper between 60 and 105 g/m2.

A nearby computer can connect through USB 2.0 Type-B. Network use runs over Gigabit Ethernet; this DN version does not list a wireless LAN interface. Finished pages normally collect face-down in the 150-sheet output area, though a single-sheet face-up route is available for media that needs a straighter path. The body measures 16.4 x 18.1 x 17.6 inches and weighs about 36.0 lb with supplies installed. Power consumption during printing is listed at about 720 W.