Brother MFC-5460CN Driver

The print engine for this device is the color inkjet print technology while scanning process uses the CIS scanning method. The dimensions comprise of a depth of 15.5 inches, a height of 8.9 inches and a width of 17.3 inches. All these dimensions contribute to a weight of 19.8 lbs while there is an interactive user interface on the device.

Specifications

There is an input paper tray with this printer, and it can hold up to 100 sheets of plain paper while the output tray can hold up to 50 sheets of printed papers. The standard paperweight should also remain at 80 gsm. The printer supports an automatic document feeder (ADF) that helps the input tray by holding an additional 35 pages of plain sheets for the printing process.

The primary means of connecting this printer to a PC is through the standard USB 2.0 port full speed, and the other one is through the Ethernet LAN network port. The applicable component for the latter will be the Ethernet 10/100 Base-TX. The device also has an inner memory capacity of 32 MB of RAM while it supports an external TAD interface too.

The operating conditions of the printer include a temperature range between 10 and 35⁰C for under normal conditions and for best print quality, it requires between 20 and 33⁰C. Apart from temperature, there is also a required humidity level which is between 20 and 80% without condensation both for normal operations and best print quality.

This printer supports speed dialing to 100 locations during the faxing operations, an error correction mode (ECM), remote access, and fax forwarding. Other features include a broadcasting feature that can work up to 150 locations at maximum and a dual access compatibility. The modem speed for sending r receiving fax messages is about 33600 bps while the transmission speed is about 3 seconds. Download Brother MFC-5460CN driver from Brother website