Brother HL-2220 Driver Download

The Brother HL-2220 printer uses enhanced electrophotographic laser print technology. Also, the inbuilt processor is the ARM9 type with a speed of 200 MHz and an internal memory of 8 MB of RAM. The warm-up time for the printer is less than 7 seconds at a temperature of 23°C. Also, the warm-up time from power-on is less than 25 seconds at the same temperature.

Brother HL-2220 Specifications

The main input paper tray load can hold up to 250 sheets of plain paper, and a manual slot holds one sheet at a time. The paper output tray, however, can take up to 100 sheets of printed paper in a face-down pattern. However, one sheet can exit face up through the straight paper path. Furthermore, this printer has a width of about 14.5 inches, a depth of 14.2 inches and a height of 7.2 inches. The weight of the machine without the carton but with toner or drum in place is up to 14.8 lbs.

The printer also contains specific consumables such as a starter toner that can print approximately 700 pages of paper. It also has a standard toner with a capacity to print up to 1200 sheets of paper in accordance with the ISO/IEC 19752 standards. There is also another compatible toner, the high capacity toner that can print up to 2600 pages of paper. The drum unit of the printer can handle approximately 12,000 pages with one page per job.

The power specifications of the Brother HL-2220 printer involve a power source input of 110 to 120 volts at 50/60 Hz. The power consumption of the device on average when ready to print is approximately 62 watts. The deep sleep mode uses about 0.8 watts at the same average temperature.