HP Laser 303dw Driver Download

HP Laser 303dw Driver lets a computer send print jobs correctly to this monochrome laser printer. After installation, the system can recognise the printer instead of treating it as an unknown device. A nearby computer can use a wired setup, and wireless printing can run through the network when the printer has been connected. That link matters because paper size, quality, and other print settings need to reach the machine before the job starts.

HP Laser 303dw Specifications

The HP Laser 303dw is a monochrome laser printer for print jobs only. It has no scanner glass, copy unit, or fax hardware. Printing comes from a black laser engine that uses one toner cartridge and a separate black imaging drum. The small control panel keeps things basic, with four indicator lights and three buttons.

Best-quality output reaches 1,200 x 1,200 dpi, although everyday print mode runs at 600 x 600 dpi. A4 black pages print at up to 30 ppm. For two-sided documents, the automatic duplex unit slows the pace to up to 15 ipm. The first page can leave the printer in as little as 8.5 seconds from ready state, which matters more for short office jobs than the top speed. Print language support includes PCL6, GDI, PCLm, PWG, and URF.

Paper loads mainly from the 250-sheet cassette. A single-sheet multipurpose tray sits ready for an envelope, label sheet, or other small job that should not be mixed into the main stack. Printed pages collect in the 100-sheet output area, with a maximum output capacity of 120 sheets. The paper path takes common office sizes such as A4, A5, A6, B5, and executive. Envelopes, labels, cardstock, bond, archive, and heavier sheets can also pass through it, within a 60 to 220 gsm media range.

Automatic duplex printing has a tighter paper limit, from 60 to 105 gsm. A nearby computer can use the Hi-Speed USB 2.0 port. For wireless jobs, the printer uses 802.11b/g/n on the 2.4 GHz band, and Wi-Fi Direct helps when a router connection is not available. Mobile printing works through Apple AirPrint, Mopria, and the HP app. Inside the body, 256 MB memory and a 600 MHz processor handle print data; with the trays closed, the printer measures 368 x 334.5 x 202 mm and weighs 7.4 kg.