The Canon i-SENSYS LBP3250 printer model has an average print speed of 23 pages per minute for monochrome documents. The rate also applies to the use of A4 paper sizes through the monochrome laser beam printing technology. The average print quality resolution is up to 600 x 600 dots per inch (dpi). However, the maximum print resolution is up to 2400 x 600 dpi with the automatic image refinement (AIR) component.
Canon i-SENSYS LBP 3250 driver Downloads for Microsoft Windows 32-bit – 64-bit and Macintosh Operating System.
Toner Cartridge Details
Toner Cartridge 713 Black – Yields approx 2000 Pages
Canon i-SENSYS LBP3250 Driver for Windows
Driver and Software for Mac OS
Driver for Linux
Specifications
When the machine is warming up from standby mode, it takes only 0 seconds. But when warming up from the power-on method, it takes about 10 seconds or less. The first print output time is approximately 6 seconds or less from the command to print. This machine can produce a duty cycle of up to 8,000 pages per month at the optimum level. It also supports a print margin of 5 mm at the four sides of the paper.
In media handling, the standard paper capacity is up to 250 sheets of plain paper through the multipurpose tray. Besides, it uses a manual feed slot that can take one sheet at a time. On the other hand, the output tray can accommodate up to 100 sheets of plain paper in a face-down manner. The supported media types include plain paper, heavy paper, transparent films, index cards, and envelopes. It supports both standard and custom-sized paper sizes too.
Some of the supported paper sizes include A4, A5, B5, legal, letter, executive, 16K, envelopes DL, Monarch, and custom sizes. However, both the manual slot and the multipurpose tray allow a range between 60 and 163 gsm regarding the media weight supports. The device’s power specifications include a voltage range between 220 and 240 volts at 50/60 Hz frequency.