Brother TD-2135N Driver Download

Brother TD-2135N Driver helps the computer send label-printing commands to this printer-only desktop label printer. After installation, the system can identify the TD-2135N and send jobs to the correct device. Print data can travel through USB or a wired network connection, so the matching driver matters for steady communication. Once the connection is set, the printer produces barcodes, receipts, tags, and workplace labels.

Brother TD-2135N Specifications

The Brother TD-2135N is a desktop two-inch label printer built around direct thermal printing, so ribbon supplies do not belong to its media system. It prints only and has no scanning, copying, or fax hardware. Local operation uses power and feed buttons instead of a display. Brother gives the memory as 64 MB RAM and 256 MB flash, with power supplied through a 100 to 240 V AC adapter.

Printing reaches 300 dpi and runs at up to 152.4 mm per second, depending on the selected media. Maximum print width is 56 mm, with label length from 6 mm to 1,000 mm across supported label formats. Command support covers P-touch Template 2.0, ZPL II compatible, Raster, ESC/P, and CPCL compatible modes, placing the unit within Brother’s TD-2000 range.

Media handling covers receipt stock, die-cut labels, tags, and wristbands. Receipt rolls may use non-coated or coated stock, while roll diameter reaches 127 mm on a 25.4 mm core. Maximum media width is 63 mm. Thickness ranges from 0.058 mm to 0.090 mm for receipts, 0.080 mm to 0.170 mm for labels, and 0.090 mm to 0.135 mm for tags.

Connections include USB 2.0 full-speed through a mini-B peripheral port, 10/100BASE-TX wired LAN, and a USB host port. Serial connection requires Brother’s optional PA-SCA-001 cable. Built-in Wi-Fi and Bluetooth belong to the related NWB version rather than this model. The body measures 110 mm wide, 215 mm deep, and 172 mm high, while the main unit weighs 1.34 kg.