Brother HL-L3228CDW Driver Download

Brother HL-L3228CDW Driver is for the HL-L3228CDW colour laser printer, which prints everyday documents from a connected computer. The driver sends print data in the format this model can process. After installation, print control can run through USB, wired network, Wi-Fi, or Wi-Fi Direct, depending on the setup. This model only prints, with no scanner, copier, or fax hardware.

Brother HL-L3228CDW Specifications

Brother HL-L3228CDW is a colour LED printer for print-only work, not a scanner, copier, or fax machine. Its electrophotographic LED engine runs with 256 MB of standard memory. A one-line display shows 10 double-byte or 20 single-byte characters. With supplies installed, the body measures 399 x 399 x 239 mm and weighs 15.2 kg. Rated power input is 220 to 240 V AC at 50/60 Hz.

Printing reaches 600 x 600 dpi, while best mode gives 2400 dpi class output at 600 x 2400 quality. One-sided speed reaches 19 ppm on Letter paper and 18 ppm on A4 paper, in both monochrome and colour. Automatic two-sided printing is built in for A4 sheets. Duplex speed reaches up to 7 sides per minute, and first print time is less than 15 seconds from Ready mode and the standard tray.

Paper input comes from a 250-sheet standard tray for plain, thin, thick, and recycled paper. The tray accepts A4, Letter, B5 JIS, B5 ISO, B6 JIS, A5, A5 long edge, A6, Executive, Legal, Folio, Mexico Legal, India Legal, 16K, and A4 Short. A one-sheet manual feed slot handles bond paper, labels, envelopes, and glossy paper. Finished output holds 150 sheets face down. One sheet can exit face up.

Connectivity includes Hi-Speed USB 2.0 and wireless LAN, without the Ethernet port listed for the higher HL-L3288CDW variant. Wireless infrastructure mode covers IEEE 802.11a/b/g/n, while Wi-Fi Direct uses IEEE 802.11a/g/n. Third-party USB hubs are not supported. Average power use is about 430 W while printing, 310 W in quiet printing, 70 W in Ready mode, 10 W in Sleep, and 0.5 W in Deep Sleep.