HP Laser MFP 112a Driver Download

HP Laser MFP 112a Driver helps the computer communicate correctly with this mono laser multifunction machine. After setup, the computer can send print jobs to the laser engine and read scan commands from the flatbed scanner. Copying also depends on the same installed software, since this model combines print, scan, and copy hardware in one USB-connected unit. A wired USB setup keeps the machine tied to one nearby computer rather than a wireless network. That direct link helps documents and scans move with the correct device settings.

HP Laser MFP 112a Specifications

The HP Laser MFP 112a is a mono laser multifunction printer with print, copy, and scan hardware. Printing comes from a black toner laser engine using ReCP processing and SPL printer language. A 600 MHz processor sits behind a 2-line, 16-character LCD, so the control area stays closer to a basic office MFP than a touchscreen system.

Black A4 pages run at up to 20 ppm, and the first page can come out in as fast as 8.3 seconds. Best print output reaches up to 1,200 x 1,200 dpi. HP rates the monthly duty cycle at up to 10,000 A4 pages, but the recommended range is much lower at 100 to 2,000 pages. For two-sided documents, the printer relies on manual duplex printing through driver support rather than an automatic duplex unit.

Paper loads from a 150-sheet input tray, and finished pages collect in a 100-sheet output bin. A4, A5, A5 long-edge feed, B5 JIS, and Oficio fit the main paper range. DL and C5 envelopes are also listed, while custom sheets may run from 76 x 127 mm to 216 x 356 mm. Paper weight can range from 60 to 163 g/m². Everyday plain stock is covered, along with thicker paper, labels, cardstock, bond, archive paper, and envelopes.

A computer connects by USB, with no Wi-Fi or Ethernet listed for this exact printer. That keeps setup tied to one nearby machine rather than a shared network connection. In the shared HP 111, 112, 115, 116, and 117 MFP guide, the body size is listed at 406 x 359.6 x 253 mm.