Brother HL-L2300D Driver Download

The Brother HL-L2300D printer works with the laser technology as well as the electrophotographic print function. The memory capacity similarly has a standard size of about 8 MB of RAM that combines with the processor. This device has a liquid crystal display (LCD) section that shows the status of the printer. The power source of the printer is between 110 and 120 volts AC with a frequency of 50/60 Hz.

Brother HL-L2300D Specifications

In terms of power consumption, the highest-consuming mode is at peak performance, which is 1080 watts. The printing function uses up to 468 watts of energy at an average temperature of 25°C. However, this printing in the quiet mode takes only about 318 watts at the same temperature. Also, the ready mode uses 58 watts at the same temperature while the sleep mode takes 3.9 watts. The deep sleep mode takes 0.7 watts, while the power off mode takes approximately 0.02 watts.

The printer has exciting dimensions, including the width of 14 inches and a depth of 14.2 inches. The Brother HL-L2300D printer has a height of about 7.2 inches while the weight is about 15 lbs, about 6.8 kg. The printer’s recommended interface is through the standard USB 2.0 hi-speed port with a USB cable. It should not be longer than 2 meters, which is about 6 ft long according to the IEC 62301. Users should also note that the power consumption of the device varies slightly depending on the environment of usage.

This printer supports automatic duplex printing that allows the device to print on both sides of the paper. The compatible print language is PCL6, and the resolution is 600 x 600 dots per inch (dpi). The highest resolution, however, is about 2400 x 600 dpi at the best quality.