Canon imageCLASS LBP253x Driver

The print method of the Canon ImageCLASS LBP253x model is the monochrome laser beam print technology for a high productivity level. With this unique component, the machine can run at a print speed of 33 pages per minute (ppm) for A4. The print quality resolution, however, varies to include 600 x 600 dots per inch (dpi) at a minimum level. An equivalent level is up to 1200 x 1200 dpi, while the maximum resolution is 2400 x 600 dpi.

Supported Toner Catridges

Toner Catridge 319  :   Approx. 2,100 Pages and Catridge 319II    :   Approx. 6,400 Pages yield based on ISO/IEC Standard

The first print out time for this device is about 6.0 seconds or even less. Besides, the machine supports print languages such as UFR II, postscript three, and PCL 6. The method also takes about 16 seconds or less to warm up and be ready to print. But this parameter only applies to wake from the Power ON mode. On the other hand, the sleep made takes about 9 seconds to recover from the sleep mode.

The recommended paper sizes for the auto duplex print mode include legal, A4, letter, foolscap, and Indian legal. But when these variations must have a wight within the range of 60 and 120 gsm. By the way, the machine Canon imageCLASS LBP253x has an input tray that can hold up to 250 sheets of plain paper. But the multipurpose tray will supply an additional 50 sheets of plain paper. Besides, there is an optional paper feeder that can hold 500 sheets of plain paper.

Therefore, the total maximum paper capacity of the machine is about 800 sheets of plain paper. On the other hand, the output tray will contain 150 sheets of printed documents in a face down pattern. When this machine is also in use, it supports the use of wired connectors through the USB hi-speed port. Besides, it also supports the use of Near Field Communication (NFC), however, in a passive way.